Intel RSTe(Rapid Storage Technology enterprise) RAID Driver for Windows 2022/2019

Supported Controllers:
               	Intel VROC (VMD NVMe RAID) Intel SSD Only   for   NA
	            Intel VROC (VMD NVMe RAID) Premium   for   4L47A39164

		
NOTE TO SERVICE - Reference RETAIN #N/A

Version 8.5.0.1592
------------------
Fixed issue
-Awhile adding a disk, it may not be added to the existing Raid 0, and an "Internal error" message may also be returned.(18033850568)
-The trial notification at the start of the trial may display 0 days instead of 90.(18033876218)
-Data could be corrupted on raid 5 under specific conditions.This has been addressed in a technical advisory that can be provided by Intel.(18033689418)
-With the Micron M.2 SSD, there may be a disk error in which BurnIn test:Test file could not be created.(15012745887)
-Event ID 4155 regarding CD/DVD rom used to show invalid serial number of the device.(15012777627)
-Enable Intel® VMD may increase boot time by 15 sec without a hardware key plugged in.(15012158141)
-Smart App Control could block Intel® VROC driver actions.(18031491855)
-Page-Fault Exception may occur while calling EfiNvmExpressPassThru to send EnableBlock SID command after hot remove a NVMe SSD behind Intel® VMD.(15012744995)
-Rebuild action may be very slow with some cache settings set incorrectly.(18022848256)
-Migrating volume to another level may be impossible when user changes the name of volume.(18023073780)
-Optimize HW key detection, Upgrade key is changed from “premium” to “pass-thru” during running reboot stress in WIn10 22H2 OS with BCB VMD.(15013389958)
-Secure erase feature for NVMe has been added.(18030599433)
-Missing disk used to have ID 0-255-0-0 after reboot.(14019194649)
-Operation" property may not show ongoing rebuild process.(15014295238)
-When attempting to rebuild a degraded RAID 10 matrix (second RAID volume is a RAID 5) with 2 drive failures (RAID 10 - Degraded; RAID 5 - Fail), the Intel® VROC driver may become unresponsive.(18015582447)
-Intel® VROC Bad Block Management (BBM) logging may report the wrong drive serial number when logging BBM events..(18023331378)


Version 8.0.0.4028
------------------
-I/O may become unresponsive with NVMe VROC for Windows* under heavy I/O while using matrix RAID.(18016591025)
-A second RAID volume may not rebuild to the hot-spare drive after resetting one member disk to non-RAID.(1508749788)
-Hot removal of a matrix RAID member may result in a system failure.(1508747791)
-When running in a matrix RAID configuration (two RAID volumes in a single RAID array), the bad block management process may not properly detect bad blocks..(18013439721)
-System may fail to start after an unexpected power loss..(1806564424)

Version 7.7.0.1260
------------------
-Intel® VROC bad block management process may take (3 to 4 times) longer than in previous versions.(18016058101)
-Fail to install Windows* Server 2019 with QWMB CPU.(1508793548)
-[VROC] Drive failure messages seen on initiating IO.(1508906750)
-Intel® VROC may not properly calculate the LBA locations when performing the Read Patrol Bad Block Recovery process, inadvertently missing some bad blocks..(22011196948)
-Intel® VROC RAID Write Hole parity calculation may be computed incorrectly..(14012886123)
-System may fail to start after an unexpected power loss..(1806564424)


Version 7.5.3.1004
------------------
Initial Release